VX 680 Bluetooth & 3G
  • 29 Aug 2022
  • 1 Minute to read
  • Contributors
  • Dark
    Light

VX 680 Bluetooth & 3G

  • Dark
    Light

Bluetooth Setup

Ethernet Connection

  1. Insert the ethernet cable into the ethernet port (labeled ETH) on the rear of the charging base and plug the other end of the cable into your router
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Telephone Connection

  1. Insert the ethernet cable into the telephone port (labeled with a telephone icon) on the rear of the charging base and plug the other end of the cable into your telephone outlet
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

3G Setup

Ethernet Connection

  1. Insert the ethernet cable into the ethernet port (labeled ETH) on the rear of the charging base and plug the other end of the cable into your router. Please note this connection is only necessary for updating the terminal and not its use.
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Telephone

  1. Insert the ethernet cable into the telephone port (labeled with a telephone icon) on the rear of the charging base and plug the other end of the cable into your telephone outlet. Please note this connection is only necessary for updating the terminal and not its use.
  2. Plug the power adapter into a wall outlet and then into the terminal (labeled with a lightning bolt)
  3. Place the terminal into the charging base (8-12 hours of charging is recommended daily)

Settlement & Reports

Printing the Batch Report

  1. Press the printer screen icon in the bottom right of the screen
  2. Press the detailed reports icon
  3. Once it's done printing you can press the red button to get back to the main screen

Settling the Batch

  1. Press the settlement button on the screen
  2. Enter password 1 6 6 8 2
  3. Confirm total and settle batch
  4. A settlement report will print and say 'settlement successful'